SPECIFICATIONS

Brand Name: FUNGDO

Choice: yes

High-concerned chemical: None

Item Type: Control Box

Origin: Mainland China

semi_Choice: yes

Description

When use 3D printer in a closed room, we always feel very uncomfortable due to unpleasant material smell,like melt ABS fume or resin odor, it’s may hurt your and family member’s health.

This enclosure was designed to resolve this problem, but then we found it could be a warmer to improve FDM 3D printer printing ability in flexible filament like ABS or PC , and could improve resin fluidity so could let LCD printer curing fast and better, during test, we found it also could be a dryer ,we have a roll of ABS filament opened for 2 years, after use this enclosure, it’s still could be print very well.the design and material also make the enclosure to be a very good UV light shelter or dust cover,waterproof tent and can reduce working noise . so this multifunctional 3D Printer enclosure kit will surely improve you printing enjoyment

1. Effectively Stop 3d Printing Fume Or Odor Affect Your Nose And Health! The enclosure with excellent airtight performance, can insulate the smell emit from 3d printer resin or melted filament in time, thenextract the smelly air out quickly by ventilation system.No more nasty fumes in the working room!

2. Enhanced Warming Affect,Contribute To Better Printing Quality And High Success Rate.When Printender-3 withABS filament (nozzle 240℃,bed 110℃, room temp.27℃),20-30 min. later, interior temp. could go to 41-42℃, with this constant temp., print object not easy wrap on bottom or crack between layers ; print an epax 10.1 inch mono LCD printer, at room temp.27℃, enclosure can go up to 33-35℃, which means allow resin flow faster, especially in cold days,this enclosure will help to print better

3 2. Multifunctional Usage.Excellent warming affect with exhaust fan make the enclosure to have unexpected Dryer function, when test ender 3to print ABS filament,the inner humidity is 65%,  20 minutes later, interior humidity drop to 34%(with exhaust fan on), for long time,humidity would low to 26%. This enclosure also could be a Dust Cover ,WaterproofTent, UV light shelter and can reduce working noise.

2. Easy to install& Convenient to Use . Assemble the enclosure just like a simple tent;with lighting bar and observation window, easy to watch printing progress; the window made of dark transparent material,all zippers are air tighten ,so allow LCD printer working without acrylic coverand allow resin inside without been cured for long time storage;both side with exhaust fan seat,free to arrange extract direction according to need; also with valve to avoid insect come into room from the vent.

5:Wide Compatibility .Small version Inner size W18.9"*D23.6"*H28.3"(48cm*60cm*72cm),can compatible for most LCD printer under 13.6 inch and FDM 3D printer size like Ender 3.